Class TD
Best choice for line array
Independent adjustable peak output voltage
Popular in most countries
Outstanding amplifier protection
FP 4-Channel Top View
FP 4-Channel Rear Plate
| Mode | FP4.13 | FP2.23 | FP2.16 | FP2.13 |
| 8Ω Stereo Power 4Ω Stereo Power 2Ω Stereo Power 8Ω Bridged Power 4Ω Bridged Power | 4x1350W 4x2100W 4x2500W 2x4200W 2x5000W | 2x2350W 2x4400W 2x7000W 8800W 14000W | 2x1600W 2x3000W 2x4500W 6000W 9000W | 2x1350W 2x2100W 2x2500W 4200W 5000W |
| Frequency Response | 20Hz-34kHz(±0.3dB)@1W,8Ω | |||
| THD 20 Hz - 20 kHz for 1 W | <0.1% | |||
| Signal-to-Noise Ratio | >112 dB | |||
| Channel separation (Crosstalk) at 1 kHz | >70 dB | |||
| Channel separation | >70dB@1kHz | |||
| Input Connectors (per channel) | 3-pin XLR, electronically balanced | |||
| Output Connectors (per channel) | Binding Posts 2-pole | |||
| Tour Class Protection | ACL, IGM, Auto Ramp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input | |||
| Operating voltage, 230 V / 115 V nominal | 130-265V / 65-135V selectable | |||
| Voltage Gain (dB) | 23, 26, 29, 32, 35, 38, 41, 44dB selectable | |||
| Input impedance | Temperature controlled fan, airflow from front to rear | |||
| Protection | Short circuit，open circuit，direct current voltage，overheat, overload，radio frequency，ultralow frequency protection | |||
| Power requirement | AC180V-240V(90V-120V)，50-60Hz | |||
| Amp dimension | 20 k Ohm | |||
| Level adjustment (per ch.) | Front-panel potentiometer, 31 position detented from -inf to 0 dB | |||
| Dimensions: (H*W*L) | 88Xx483x396mm | |||
| Packing dimension | 180x560x500mm | |||
| Net weight(kg) Gross weight(kg) | 12.5 16.5 | |||
1. Sheet Metal Processing
2. Circuit Board Plug-in
3. Circuit Board Debugging
4. Circuit debugging
5. Product assembly
6. Debugging of the whole machine
7. Product Aging
Copyright © 2019 Guangzhou Gisen Audio Equipment Factory | All Rights Reserved
