FP series amplifiers are with switch power supply. Its compact and precise structure makes it high-performance. Each channel has independent adjustable peak output voltage, which enables the amplifier to drive speakers with different power easily. Intelligent protecting circuit provides advanced technology to protect the internal circuits and connected loads, so that the amplifiers and speakers can still be operated in extreme conditions. Applied to situations like Performance, Night Club, etc.
FP 2-Channel Top View
FP 2-Channel Rear Plate
| Mode | FP4.13 | FP2.23 | FP2.16 | FP2.13 |
| 8Ω Stereo Power 4Ω Stereo Power 2Ω Stereo Power 8Ω Bridged Power 4Ω Bridged Power | 4x1350W 4x2100W 4x2500W 2x4200W 2x5000W | 2x2350W 2x4400W 2x7000W 8800W 14000W | 2x1600W 2x3000W 2x4500W 6000W 9000W | 2x1350W 2x2100W 2x2500W 4200W 5000W |
| Frequency Response | 20Hz-34kHz(±0.3dB)@1W,8Ω | |||
| THD 20 Hz - 20 kHz for 1 W | <0.1% | |||
| Signal-to-Noise Ratio | >112 dB | |||
| Channel separation (Crosstalk) at 1 kHz | >70 dB | |||
| Channel separation | >70dB@1kHz | |||
| Input Connectors (per channel) | 3-pin XLR, electronically balanced | |||
| Output Connectors (per channel) | Binding Posts 2-pole | |||
| Tour Class Protection | ACL, IGM, Auto Ramp, short circuit, DC voltage, turn-on/off transient, current inrush, sub/ultrasonic input | |||
| Operating voltage, 230 V / 115 V nominal | 130-265V / 65-135V selectable | |||
| Voltage Gain (dB) | 23, 26, 29, 32, 35, 38, 41, 44dB selectable | |||
| Input impedance | Temperature controlled fan, airflow from front to rear | |||
| Protection | Short circuit，open circuit，direct current voltage，overheat, overload，radio frequency，ultralow frequency protection | |||
| Power requirement | AC180V-240V(90V-120V)，50-60Hz | |||
| Amp dimension | 20 k Ohm | |||
| Level adjustment (per ch.) | Front-panel potentiometer, 31 position detented from -inf to 0 dB | |||
| Dimensions: (H*W*L) | 88Xx483x396mm | |||
| Packing dimension | 180x560x500mm | |||
| Net weight(kg) Gross weight(kg) | 12.5 16.5 | |||
1. Sheet Metal Processing
2. Circuit Board Plug-in
3. Circuit Board Debugging
4. Circuit debugging
5. Product assembly
6. Debugging of the whole machine
7. Product Aging
Copyright © 2019 Guangzhou Gisen Audio Equipment Factory | All Rights Reserved
